acf domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/iteclbco/projects.automationmate.com/wp-includes/functions.php on line 6170updraftplus domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/iteclbco/projects.automationmate.com/wp-includes/functions.php on line 6170wordpress-seo domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home/iteclbco/projects.automationmate.com/wp-includes/functions.php on line 6170The post Plastic Injection Machine appeared first on Automate.
]]>include Hardware and Electrical Design, Software PLC and
HMI Development New Cabinet and installation and Wiring.
Testing And Commissioning
REQUIREMENTS OF THE CUSTOMER:
•Replace Existing old system that was causing too many problems on the electrical and hydraulic level stopping the production and affection the business.
•Install a suitable and reliable controller that can perform the needed requirements and put back the machine into accurate production with negligible downtimes.
•Find the needed datasheets for the old hydraulic controllers, such as the pump and the valves controllers MOOG for instance, and many other third-party devices that can be found within the old system design.
BENEFITS OF THE CUSTOMER:
•Latest technology installed that can ensure high availability of products and spare parts, flexibility in replacement, and enhancement of upgrades when needed.
•Production Costs are automatically reduced due to the cycle times improvements, reduction of the number of operators needed to run the machine, negligible shutdown times, no mechanical or electrical failures.
•No more headache on the level of the mechanical problem that is sometimes caused by the malfunction of the electrical system
IMPLEMENTATION:
•Solution Partner always implements the suitable design and technology using the lowest budget making sure that the hardware used is perfectly able.
For any inquiry or support, please contact us at support@automationmate.com
The post Plastic Injection Machine appeared first on Automate.
]]>The post KAPPA – Battenfeld Plastic Injection Machine appeared first on Automate.
]]>Testing And Commissioning
•Replace Existing old system that was causing too many problems on the electrical and hydraulic level stopping the production and affection the business.
•Find the needed datasheets for the old hydraulic controllers, such as the pump and the valves controllers MOOG for instance, and many other third-party devices that can be found within the old system design.
•Latest technology installed that can ensure high availability of products and spare parts, flexibility in replacement, and enhancement of upgrades when needed.
•No more headache on the level of the mechanical problem that is sometimes caused by the malfunction of the electrical system
•Solution Partner always implements the suitable design and technology using the lowest budget making sure that the hardware used is perfectly able.
For any inquiry or support, please contact us at support@automationmate.com
The post KAPPA – Battenfeld Plastic Injection Machine appeared first on Automate.
]]>The post MIR – Plastic Injection Machine appeared first on Automate.
]]>include Hardware and Electrical Design, Software PLC and
HMI Development New Cabinet and installation and Wiring.
Testing And Commissioning
REQUIREMENTS OF THE CUSTOMER:
•Replace Existing old system that was causing too many problems on the electrical and hydraulic level stopping the production and affection the business.
•Install a suitable and reliable controller that can perform the needed requirements and put back the machine into accurate production with negligible downtimes.
•Find the needed datasheets for the old hydraulic controllers, such as the pump and the valves controllers MOOG for instance, and many other third-party devices that can be found within the old system design.
BENEFITS OF THE CUSTOMER:
•Latest technology installed that can ensure high availability of products and spare parts, flexibility in replacement, and enhancement of upgrades when needed.
•Production Costs are automatically reduced due to the cycle times improvements, reduction of the number of operators needed to run the machine, negligible shutdown times, no mechanical or electrical failures.
•No more headache on the level of the mechanical problem that is sometimes caused by the malfunction of the electrical system
IMPLEMENTATION:
•Solution Partner always implements the suitable design and technology using the lowest budget making sure that the hardware used is perfectly able.
•Siemens Products with the S7-Family has proven a high efficiency in operation based on rugged design of electronics for dusty and harsh environment, therefore using S-200 or 1200 fits perfectly for this kind of application.
For any inquiry or support, please contact us at support@automationmate.com
The post MIR – Plastic Injection Machine appeared first on Automate.
]]>The post IPM: Blow Molding Machine appeared first on Automate.
]]>• Celeron
• TwinCAT
• Beckhoff Blow Molding Controller
Process:
Automate installed a system to collect and dispose of the waste using state-of-the-art technology to combine and neutralize streams for recycling and ensure the stream is below the level of concentration to be considered waste. This system consists of several lifts or pump stations which collect waste from the hoods and transfer it to the much larger liquid waste holding tank which will be configured to balance the pH of the solution and dilute the ionic content to levels low enough for disposal as non-hazardous waste. The concentrated solvent waste cannot be diluted in this manner, so it is cost-effective to keep this waste in the most concentrated form for recycling or full incineration. The dilute solvent waste will contain levels of solvent well below the threshold levels to be considered as waste and can therefore be disposed of as standard lab waste, however, this waste must be kept from disposal until it can be verified that levels do not exceed those set by regulatory agencies.
For any inquiry or support, please contact us at support@automationmate.com
The post IPM: Blow Molding Machine appeared first on Automate.
]]>The post SOUTH PLAST – Plastic Injection Machine appeared first on Automate.
]]>include Hardware and Electrical Design, Software PLC and
HMI Development New Cabinet and installation and Wiring.
Testing And Commissioning
REQUIREMENTS OF THE CUSTOMER:
•Replace Existing old system that was causing too many problems on the electrical and hydraulic level stopping the production and affection the business.
•Install a suitable and reliable controller that can perform the needed requirements and put back the machine into accurate production with negligible downtimes.
•Find the needed datasheets for the old hydraulic controllers, such as the pump and the valves controllers MOOG for instance, and many other third-party devices that can be found within the old system design.
BENEFITS OF THE CUSTOMER:
•Latest technology installed that can ensure high availability of products and spare parts, flexibility in replacement, and enhancement of upgrades when needed.
•Production Costs are automatically reduced due to the cycle times improvements, reduction of the number of operators needed to run the machine, negligible shutdown times, no mechanical or electrical failures.
•No more headache on the level of the mechanical problem that is sometimes caused by the malfunction of the electrical system
IMPLEMENTATION:
•Solution Partner always implements the suitable design and technology using the lowest budget making sure that the hardware used is perfectly able.
•Siemens Products with the S7-Family has proven a high efficiency in operation based on rugged design of electronics for dusty and harsh environment, therefore using S-200 or 1200 fits perfectly for this kind of application.
For any inquiry or support, please contact us at support@automationmate.com
The post SOUTH PLAST – Plastic Injection Machine appeared first on Automate.
]]>